4mm 25w 12v Electric Cartridge Heater , 3d Printer Ceramic Heater Anti Corrosion

high quality 4mm 25w 12v electric Cartridge Heater 3D Printer Heater

Tutco provides UL cartridge, silcione & open coil heaters for traditional printers and 3D printers.

Cartridge heaters is consist of a cylindrical stainless steel tube and thus provide a high corrosion prevention. The heating wire inside which is wound onto a ceramic core. The number of coils varies depending on the power. and provide a great uniform distribution of heat, which considerably increases the long life of the heater as well as prevents the oxidation of the heater wire even at high temperatures .The solids, liquids, and gases need to be heated by cartridge heater, transmit heat quickly by conduction if the producer of the heat (the cartridge) is in direct contact with the heat sink (any solid, liquid, or gas). Widely used for manufacturing plastic and rubber parts in the car industry or in the food processing industry, etc they are also commonly found in the chemical, electronics, medical equipment, packing and nuclear industries.Apart from our broad standard range we also develop and manufacture cartridge heaters according to your special demands.

Cartridge Heater Technical Detail:

• Tube diameter: Φ3mm-Φ30mm
• Tube Material:SS304;SS316,SS321,NICOLOY800 etc.
• Insulation Material:High-purity Mgo
• Reisistance wire element:Ni-Cr or FeCr
• Wattage density: high/middle/low(5-25w/cm2)
• Lead Connection Option: Crimped or Swaged leads
• Lead wire type: 10" Standard(Teflon/silicone high temperature frberglass)

• Liquid Immersion
• Plastic Molds
• Dies
• Labeling
• Medical Equipment
• Platens
• Packaging Equipment
• Hot Stamping
• Sealing
• Injection Molding

Why TUTCO
1. Heater is UL listed for Outdoor Applications
2. All of the limit controls in all TUTCO duct heaters are
automatic resets or are manually resettable. There are
no devices that have to be replaced when tripped.
3. In a horizontal airflow application, the airflow direction is not specific; it can go either direction without any modification.
4. With our wire rack element suspension system, the heater
coil is less susceptible to airflow shading and allows a very small pressure drop across the coils.
5. All TUTCO duct heaters carry a zero clearance rating for installations into ducts.